Carrier 30RAP Micro-Channel Coil Replacements
Emergent Coils offers high quality replacement microchannel coils for Carrier Condenser 30RAP units. These replacements come coated and with a 5 Year warranty.
Purchase 30RAP Microchannel Coils
Reason Our Coils Are Better
- Built in The USA
- UL Certified in US and Canada
- 5 year warranty on all coated micro-channel coils
- In stock and ready to go
- Working pressure of 650 PSI for R410A or R134A
- Lower refrigerant drop for better performance
- Flange casing and easy installation
All 30RAP coil replacements come factory tested and are 100% leak free. These are designed to be an upgrade to the Carrier factory coils with an upgraded tube wall and coating to prevent future corrosion.
Replacements For:
Carrier 30RAP Installation
- Remove existing 30RAP coil(s) in accordance to refrigerant recovery regulations.
- Install new 30RAP micro channel. Condenser inlet must be on the top. Do not install upside down.
- Use mounting sheet metal screws to fasten coil flange.
- Both existing 3/4" inlet connections need to be combined to a single 1-1/8" inlet connection for easier piping
- Connect 3/4" outlet connection to 7/8" coil connection
- Braze copper connections using silver solder or Phos-Copper. Use wet rag on aluminum side of connections to protect the aluminum/copper joint from damage of overheating.
- Leak check all connections and recharge the system using Carrier's recommended refrigerant charge quantity.