Emergent Coils is a leading supplier for Carrier 30RB Micro-Channel coils. These coils are often stocked and ready to ship. Carrier's 30RB is one of many heat exchangers that we see request for. These coils much like the rest of the micro-channel condenser coils we sell are stocked, fully coated and with a 5 year warranty. If this isn't exactly what you are looking for please see our line of stocked microchannel coils. 

Purchase Stock 30RB Microchannel Coils

Reasons Our Coils Are Better

• Built in The USA
• UL Certified in US and Canada 
• 5 year warranty on all coated micro-channel coils
• In stock and ready to go
• Working pressure of 650 PSI for R410A or R134A
• Lower refrigerant drop for better performance
• Flange casing and easy installation

All 30RB coil replacements come factory tested and are 100% leak free. These are designed to be an upgrade to the Carrier factory coils with an upgraded tube wall and coating to prevent future corrosion. 

Carrier 30RB Replacement Drawing

Replacements for: 

30RB060 30RB070 30RB080 30RB090 30RB100 30RB110 30RB120 30RB130 30RB150 30RB160 30RB170

30RB190 30RB210 30RB225 30RB250 30RB275 30RB300 30RB315 30RB330 30RB345 30RB360 30RB390

 

Carrier 30RB Installation

• Remove existing 30RB coil(s) in accordance to refrigerant recovery regulations.
• Install new 30RB micro channel. Condenser inlet must be on the top. Do not install upside down. 
• Use mounting sheet metal screws to fasten coil flange.
• Both existing 3/4" inlet connections need to be combined to a single 1-1/8" inlet connection for easier piping
• Connect 3/4" outlet connection to 7/8" coil connection
• Braze copper connections using silver solder or Phos-Copper. Use wet rag on aluminum side of connections to protect the aluminum/copper joint from damage of overheating.
• Leak check all connections and recharge the system using Carrier's recommended refrigerant charge quantity.